Health Coat

In case of New Construction

1. Groundwork adjustment

Health Coat 1. Please clean with the removal of the encrustations such as dust and oil.
2. In the case of a groundwork board, please apply sand-paper and perform joint pate processing.
(The powder after sand-paper application is eliminated enough and cleaned.)
3. When you use steel screws and nails, please make them stain-proofed in advance and then carry out the work.
Because, steel screws and nails get rusty. Please use stainless steel or aluminum as a general rule.
4. In the case of the groundwork with much quantity of suction of the paint, please perform Sheeler processing.
A processing method varies according to the groundwork.
※ Specifically, please refer to construction manual.

2. "Health Coat" painting

Health Coat 1. Please cover the neighboring area enough not to stain the neighboring area.
2. Please perform the stirring of materials enough. (Because, there is the deposition of materials. Please go by all means.)
3. Painting of "Health Coat".
Painting method ... A roller or a brush, air-less
Quantity of application ... 300 g/m2
The painting number of times ... Please divide it into twice, and please paint it. Please take one hour interval between 2 paintings.
※ In the case of ICAS construction, Application quantity of "Health Coat" ... 450 g/m2 (three times coating)
※ Please refer to construction manual for details.

3. Finish

Health Coat After "Health Coat" painting, please finish it after being dried enough.
We can finish it with a cross for finish or color finish is possible.

  ■Finish it with a cross
     Use cross ... Our recommended air permeable cross
     Cross paste ... Our recommended adhesive
         Wall bond 100 (product made by Yazawa Chemical Industry Co., Ltd.)
         ルーアマイルド (product made by Yayoi Chemical Industry Co., Ltd.)

  ■Color finish
      Color paint ... Please use "Health Coat Color” or “Design Health Coat Clay Type”.

Go to Page TOP

In case of Reform Construction

1. Groundwork adjustment (in the case of cross finish)

1. Please remove the existing cross. (Please be eliminated as much as possible while soaking a lining paper with water.)
2. When there is a step, please perform the pate disposal of steps.
3. Please remove the encrustations such as dust, the oil.
4. Please undertake construction after having stain-proofed it by all means when you use a steel screw and nail. It causes rust. Please use a product made of stainless steel or aluminum as a general rule.
5. When mold occurs on the groundwork, please carry out mold processing and take an anti-bacterial step.
6. In the case of the groundwork with much quantity of suction of the paint, please perform Sheeler processing.
※ Please work that a base had it.

2. "Health Coat" painting

Health Coat 1. Please take good care of itself enough not to stain the neighborhood. 2. Please perform stirring enough.
(Because there is the deposition of materials, please go by all means)
3. Painting of "Health Coat"
Painting method ... a roller or brush, Lysine gun spraying (diameter 3m/m), Airless
Quantity of application ... 300 g/m2 of painting
The painting number of times ...Please divide it into twice, and please paint it. Please take one hour interval in between each painting.
※ In the case of ICAS construction, "Health Coat" application quantity ... 450 g/m2 of painting (three times coating)

3. Finish

Health Coat After "Health Coat" painting, please finish it after being dried enough.
We can finish it with a cross or color.

  ■Finish it with a cross
     Cross to be used. ... Our recommended air permeable cross
     Cross paste ... Our recommended adhesive
             Wall bond 100 (Made by Yazawa Chemical Industry Co., Ltd.)
             ルーアマイルド (Made by Yayoi Chemical Industry Co., Ltd.)

  ■Color finish
      Color paint ... Please use "Health Coat Color", "Design Health Coat Clay Type".

※Please refer to construction manual for details.

Go to Page TOP

Finish Method of "Health Coat"

  • Health Coat
    | Finish with “Health Coat” undertone.
    It is a method that we can finish it with “Health Coat” undertone.
    Because, black of "Health Coat" is not black of the general paint with the luster but mat black of the charcoal. It is imaged that it is calmed down with moisture. Space becomes more attractive when we use it for a ceiling and the study, a Japanese-style room, accessories of the small space.
    Black surface may whiten when we rub the black paintwork with a finger.
  • Health Coat
    | Finish with Cross.
    It is a finish method to complete breathable cross such as cross finish fiber system and paper system. In this case, we use natural system paste such as starch paste. Because, without considering about the peeling off of "Health Coat" of the ground work, we can tear off the old cross even when it is needed to renew the dirty cross. We are enjoying good reputation by the customers who like cross.
    Unfortunately, the plastic cross cannot be used.
  • Health Coat
    | Finish with "Health Coat Color" undertone.
    It is a method to finish with the acrylic aqueous color paint which keeps "Health Coat Color” finish breathable.
    The feature is that we are affordable with being able to be chosen from 600 or more.
    By the adsorption performance of "Health Coat", it may become easier to be polluted with the painting surface more than usual due to easier to get indoor dirt.
  • Health Coat
    | Finish with "Design Health Coat Clay Type".
    Including natural clay gathered from the face of the mountain, it is a method to finish with clay paint made of only material of nature limitlessly. It is not material with the thickness, but the hue that a natural genuine article has is attractive. It is finish of our recommendation that the person who was able to come to the house can feel the good point of the sense of the house.
    ※ By the adsorption performance of "Health Coat", it may become easy to be polluted with the painting surface more than usual due to become easy to get an indoor dirt.
Go to Page TOP